LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2002 >> Neon LE, Automatic >> Repair and Diagnosis (Single Page) >> Engine Performance >> Remove, Overhaul & Install >> Engine Controls - Removal, Overhaul & Installation >> Fuel Systems >> Fuel Pump Module >> Removal

Fuel Pump Module: Removal

  1. Fuel pump module is located at corner of fuel tank. See Figure. Release fuel pressure from fuel system. See FUEL SYSTEM PRESSURE RELEASE . Raise and support vehicle.
  2. Ensure negative battery cable is disconnected. Remove fuel tank cap to release any residual fuel tank pressure. Remove cap from fuel tank drain. Fuel tank drain is located on top of fuel tank, near filler tube. See Figure.
  3. Install siphon hose in fuel tank drain. Siphon gasoline into an approved gasoline container until fuel tank is empty. Remove fuel tank. See FUEL TANK .
    4. CAUTION: When removing fuel pump module from fuel tank, use care as reservoir on fuel pump module may still contain some gasoline.
  4. Ensure area around fuel pump module is clean. Using Fuel Pump Module Lock Nut Spanner Wrench (6856), remove fuel pump module lock nut. See Figure. Reservoir on fuel pump module may still contain some gasoline. Remove fuel pump module from fuel tank. Remove "O" ring from sealing area on shoulder of fuel tank.
scientia non olet · About LEMON Manuals