LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2002 >> Intrepid Base >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transmission (Service Information) >> Removal & Installation >> Valve Body >> Removal

Valve Body: Removal

  1. Raise and support vehicle. Disconnect TR sensor harness connector. See Figure .
  2. Disconnect shift cable from shift lever on transaxle. Rotate shift lever on transaxle fully clockwise. Remove shift lever from manual valve lever on transaxle. Remove bolts and oil pan.
    3. CAUTION: Overdrive and underdrive accumulator pistons and springs may fall from transaxle case when removing valve body. Note location of components for reassembly reference. Components must be installed in original location.
  3. Remove bolts, oil filter retainers, oil filter and "O" ring. See Figure . Remove bolts and valve body with transfer plate from transaxle.
scientia non olet · About LEMON Manuals