LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2002 >> Intrepid Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 79 (Interior Trim) >> Roof Structural Membrane >> Removal

Roof Structural Membrane: Removal

WARNING: This page is about a different car, the 2004 Dodge Intrepid, 2004 Chrysler Intrepid, 2004 Chrysler Concorde, and 2004 Chrysler 300M. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove headliner.
  2. Remove roof support membrane, using a Molding Removal tool, 3-M p/n 08978.
  3. Carefully pull down corner of roof structural membrane enough to insert molding removal tool between roof panel and adhesive. Activate air chisel, while keeping the blade at an angle, ensuring not to flex the roof panel. Evenly separate the adhesive strips from the roof panel until the structural membrane is removed.
    NOTE: USE EXTREME CARE WHEN PULLING ON THE STRUCTURAL MEMBRANE, THE ROOF PANEL WILL DENT/DING/CREASE/FLEX AND CAUSE PERMANENT DAMAGE.
  4. Using a razor blade scraper tool, scrape off remaining adhesive residue.
scientia non olet · About LEMON Manuals