LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2002 >> Intrepid Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 75 (Door System - Rear) >> Cable - Remote Lock Actuator >> Removal

Cable - Remote Lock Actuator: Removal

WARNING: This page is about a different car, the 2004 Dodge Intrepid, 2004 Chrysler Intrepid, 2004 Chrysler Concorde, and 2004 Chrysler 300M. However, it is still accessible from the selected car via links, so may be relevant.
  1. Open the front door.
  2. Loosen the actuator knob lock nut.
  3. Remove the lock actuator knob and lock nut.
  4. Remove the cable housing nut.
  5. Remove the trim panel and watershield. (Refer TRIM PANEL  )
  6. Remove the support bracket screws.
  7. Release the clip at the latch and disconnect the cable.
  8. Remove support tie straps, if equipped.
scientia non olet · About LEMON Manuals