LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2002 >> Intrepid Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 58 (Power Door Lock System) >> Door Cylinder Lock Switch >> Removal

Door Cylinder Lock Switch: Removal

WARNING: This page is about a different car, the 2004 Dodge Intrepid, 2004 Chrysler Intrepid, 2004 Chrysler Concorde, and 2004 Chrysler 300M. However, it is still accessible from the selected car via links, so may be relevant.
  1. Open hood, disconnect and isolate the negative battery cable remote terminal from the remote battery post.
  2. Refer to DOORS - FRONT , for door trim and water shield Removal.
  3. Disconnect the wiring clip and pigtail wire connector (Fig 1 ).
    Fig 1: Door Cylinder Lock Switch
    G03498159Courtesy of DAIMLERCHRYSLER CORP.
  4. Remove the Door Cylinder Lock Switch from door lock cylinder.
scientia non olet · About LEMON Manuals