LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2002 >> Intrepid Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 42 (Power Door Lock System) >> Door Cylinder Lock Switch >> Removal

Door Cylinder Lock Switch: Removal

WARNING: This page is about a different car, the 2003 Dodge Intrepid, 2003 Chrysler Intrepid, 2003 Chrysler Concorde, and 2003 Chrysler 300M. However, it is still accessible from the selected car via links, so may be relevant.
  1. Open hood, disconnect and isolate the negative battery cable remote terminal from the remote battery post.
  2. Refer to DOORS - FRONT for door trim and water shield Removal.
  3. Disconnect the wiring clip and pigtail wire connector (Fig 1 ).
  4. Remove the Door Cylinder Lock Switch from door lock cylinder.
    Fig 1: Identifying Door Cylinder Lock Switch
    G01164041Courtesy of DAIMLERCHRYSLER CORP.
scientia non olet · About LEMON Manuals