LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2002 >> Intrepid Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 41 (Seat Heating System) >> Driver Heated Seat Switch >> Removal

Driver Heated Seat Switch: Removal

WARNING: This page is about a different car, the 2003 Dodge Intrepid, 2003 Chrysler Intrepid, 2003 Chrysler Concorde, and 2003 Chrysler 300M. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect and isolate the negative battery cable remote terminal from the remote battery post.
  2. Remove the appropriate seat cushion side shield (Fig 1 ).
    Fig 1: Identifying Heated, Memory And Power Seat Switch Locations - (Driver Heated Seat Switch)
    G01164031Courtesy of DAIMLERCHRYSLER CORP.
  3. Working from the underside of the switch, gently rock the switch back and forth out of its mounting location.
  4. Disconnect the heated seat switch electrical connector and remove the switch.
scientia non olet · About LEMON Manuals