LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2002 >> Intrepid Base >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> 2.7L V6 Engine >> Oil >> Standard Procedure >> To Change Engine Oil

To Change Engine Oil

  1. Run engine until achieving normal operating temperature.
  2. Position the vehicle on a level surface and turn engine off.
  3. Hoist and support vehicle on safety stands.
  4. Remove oil filter cap (Figure).
  5. Place a suitable drain pan under crankcase drain.
  6. Remove drain plug from crankcase and allow oil to drain into pan. Inspect drain plug threads for stretching or other damage. Replace drain plug and gasket if damaged.
  7. Remove oil filter. Refer to (Refer to OIL FILTER )
  8. Install drain plug in crankcase.
  9. Install new oil filter. Refer to (Refer to OIL FILTER )
  10. Lower vehicle and fill crankcase with specified type and amount of engine oil, (Figure). (Refer to SERVICE INTERVALS & SPECIFICATIONS )
  11. Install oil fill cap.
  12. Start engine and inspect for leaks.
  13. Stop engine and inspect oil level.
scientia non olet · About LEMON Manuals