LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2002 >> Intrepid Base >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> 2.7L V6 Engine >> Oil Pan >> Removal

Oil Pan: Removal

  1. Remove dipstick and tube.
  2. Raise vehicle on hoist.
  3. Drain engine oil and remove oil filter.
  4. Disconnect suspension stabilizer bar and reposition for oil pan clearance. (Refer to REMOVAL - STABILIZER BAR (FRONT) )
  5. Remove structural collar from oil pan to transmission housing (Fig 1).
    Fig 1: Removing Structural Collar
    G00990825Courtesy of DAIMLERCHRYSLER CORP.
  6. Remove lower bolt attaching the A/C compressor to oil pan.
  7. Disconnect engine oil cooler line from pan (if equipped).
    CAUTION: Assure removal of the two bolts attaching the timing cover to the oil pan, as damage to the timing cover and/or oil pan may occur.
  8. Remove oil pan attaching fasteners. Remove oil pan and gasket (Fig 2).
    Fig 2: Removing & Instlaling Oil Pan & Sealing
    G00990826Courtesy of DAIMLERCHRYSLER CORP.
scientia non olet · About LEMON Manuals