LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2001 >> Voyager Base, 2.4 B >> Repair and Diagnosis >> Brakes >> Traction Control >> Anti-Lock Brake System - TEVES Mark 20 >> Bleeding Brake System >> Abs Bleeding

Abs Bleeding

NOTE: Diagnostic Readout Box (DRB-III) is necessary to properly bleed Teves Mark 20 anti-lock brake system.
  1. Ensure all hydraulic brake system components are properly installed and all connections are tight. Using scan tool, check Controller Anti-Lock Brake (CAB) for Diagnostic Trouble Codes (DTC). If any DTCs are stored, clear CAB DTCs.
  2. Bleed base brake system. See MANUAL BLEEDING  or PRESSURE BLEEDING . After bleeding base brake system, using scan tool, select ANTILOCK BRAKES followed by MISCELLANEOUS, then BLEED BRAKES. Follow scan tool screen prompts. When scan tool displays TEST COMPLETED, disconnect scan tool. Bleed base brake system again using manual or pressure bleeding method. Top off brake fluid reservoir and verify proper brake operation before moving vehicle.
scientia non olet · About LEMON Manuals