No ABS Bus Messages Received
NOTE:
After making any repairs, perform BODY VERIFICATION TEST
under VERIFICATION TESTS.
- Turn ignition on. Using scan tool, attempt to communicate with Anti-Lock Brake System (ABS) module. If scan tool identifies or communicates with ABS module, go to next step. If scan tool does not identify or communicate with ABS module, go to NO RESPONSE FROM CONTROLLER ANTI-LOCK BRAKE under COMMUNICATIONS.
- Using scan tool, erase DTCs. Turn ignition on and wait approximately one minute. Recheck for DTCs. If NO ABS BUS MESSAGES RECEIVED resets, replace instrument cluster. See ANALOG INSTRUMENT PANELS - CARAVAN, TOWN & COUNTRY, & VOYAGER article. If NO ABS BUS MESSAGES RECEIVED does not reset, test is complete.