Memory Positions In Remote Keyless Entry System

Memory Seat and Mirror Module (MSMM) communicates with the RKE system via the Programmable Communications Interface (PCI) bus (Violet/Yellow wire). See WIRING DIAGRAMS  . MSMM settings can be programmed and recalled by the RKE system. To program RKE system for memory recall, set memory seat to desired position. See PROGRAMMING MEMORY POSITIONS IN DRIVER'S DOOR SWITCH  . Within 5 seconds of second chime, press and release LOCK button on RKE transmitter. A chime will sound. To set memory recall for additional RKE transmitters, repeat procedure.

To remove a memory position from an RKE transmitter, turn ignition on. Press and release driver's door memory switch button ("1" or "2"). Press and release driver's door memory switch SET button. A chime will sound. Within 5 seconds, press and release the same driver's door memory switch button. Within 5 seconds, press and release UNLOCK button on RKE transmitter. A chime will sound. To remove memory position from additional RKE transmitters, repeat procedure. If vehicle is equipped with Electronic Vehicle Information Center (EVIC), memory position can be removed from an RKE transmitter using the overhead console. See OPTIONS USING OVERHEAD CONSOLE  .