LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2001 >> Sebring LXi, 2D Convertible >> Repair and Diagnosis >> Steering >> Steering Column >> Power Steering System - Except Coupe >> Power Steering Pressure Switch >> Removal

Power Steering Pressure Switch: Removal

  1. Disconnect the negative cable from the battery. Be sure cable is isolated from negative post on battery.
  2. Raise vehicle.
  3. Locate power steering pressure switch on back side of power steering gear (See Figure).
  4. Remove the wiring harness connector from the power steering pressure switch.
  5. Using a crow foot and long extension, remove power steering pressure switch, from power steering gear.
scientia non olet · About LEMON Manuals