LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2001 >> PT Cruiser Base, Standard >> Repair and Diagnosis >> Brakes >> Traction Control >> Anti-Lock Brake System - TEVES Mark 20 >> Removal & Installation >> Integrated Control Unit (ICU) >> Installation

Integrated Control Unit (ICU): Installation

  1. To install, reverse removal procedure. Tighten 3 ICU-to-mounting bracket bolts to specification. See TORQUE SPECIFICATIONS . Ensure 25-pin connector seal is properly installed in connector. Position 25-pin connector in socket on CAB and fully seat into socket. Push in connector lock to lock connector into place on CAB. Install brakelines on HCU and tighten to specification.
  2. Using silicone lubricant, lubricate master cylinder push rod. Install NEW vacuum seal on master cylinder push rod with notches on seal pointing toward master cylinder. Ensure seal is seated against master cylinder before installing master cylinder on power brake vacuum booster.
  3. To complete installation, reverse removal procedure. Using scan tool, initialize ICU. Bleed base brake system and HCU. See BLEEDING BRAKE SYSTEM . Test drive vehicle to ensure base brake system and ABS operate properly.
scientia non olet · About LEMON Manuals