VTSS Previously Enabled

NOTE: After making any repairs, perform BODY VERIFICATION TEST under VERIFICATION TESTS.

NOTE: During Remote Keyless Entry (RKE) module programming (configuration), if a non-Vehicle Theft Security System (VTSS) RKE module is being installed in a vehicle equipped with VTSS, VTSS PREVIOUSLY INSTALLED DTC will set. Code should only set if attempting to configure a used RKE module.

Program (configure) RKE module. See REMOTE KEYLESS ENTRY/VEHICLE THEFT SECURITY SYSTEM MODULE under PROGRAMMING. If scan tool displays VTSS PREVIOUSLY ENABLED, non-VTSS RKE module is installed. Install correct RKE module. If scan tool does not display VTSS PREVIOUSLY ENABLED, no problem is found at this time. Test is complete.