LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2001 >> Intrepid Base >> Repair and Diagnosis >> Steering >> Steering Wheel & Steering Column >> Removal & Installation >> Ignition Switch >> Removal

Ignition Switch: Removal

  1. Ignition switch attaches onto end of lock cylinder housing on steering column. See Figure . Disable air bag system. See DISABLING & ACTIVATING AIR BAG SYSTEM  . Ensure negative battery cable is disconnected from stud on shock tower and isolated from all other components.
  2. Remove multifunction switch. See MULTIFUNCTION SWITCH  .
  3. Remove Sentry Key Immobilizer Module (SKIM) if equipped. See appropriate ANTI-THEFT SYSTEMS article in ACCESSORIES & EQUIPMENT. Disconnect electrical connector from ignition switch. Remove ignition switch retaining screws. Remove ignition switch.
scientia non olet · About LEMON Manuals