Washer Pump Motor: Installation
WARNING: This page is about a different car, the 2004 Dodge Intrepid, 2004 Chrysler Intrepid, 2004 Chrysler Concorde, and 2004 Chrysler 300M. However, it is still accessible from the selected car via links, so may be relevant.
- Install new rubber grommet in reservoir.
- Carefully install pump motot into reservoir. Care must be taken not to puncture reservoir (Figure ).
- Connect the wire connectors to the reservoir pump.
- Install the front fascia as necessary (left side only and use a 2x4 to prop left edge of fascia away from body). Refer to FRONT FASCIA for installation. .
- Lower vehicle from hoist.
- Connect the negative battery cable remote terminal to the remote battery post.