LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2001 >> Intrepid Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 98 (Wiper System & Washer System) >> Washer Hoses >> Installation

Washer Hoses: Installation

WARNING: This page is about a different car, the 2004 Dodge Intrepid, 2004 Chrysler Intrepid, 2004 Chrysler Concorde, and 2004 Chrysler 300M. However, it is still accessible from the selected car via links, so may be relevant.
  1. Route washer hose up through engine compartment.
  2. Connect washer hose to top of reservoir and to washer pump discharge port.
  3. Connect hose clips to hood, tower to tower beam, and fender beam.
  4. Connect right and left hood nozzle hoses at "Y" connector.
  5. Connect "Y" connector to hood.
  6. install the underhood silencer pad clips along left rear of hood.
  7. Install the left headlamp unit. Refer to HEADLAMP UNIT .

    Be sure to test and check system for leaks and pinched or kinked hoses.

scientia non olet · About LEMON Manuals