LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2001 >> Intrepid Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 91 (Seat Heating System) >> Driver Heated Seat Switch >> Removal

Driver Heated Seat Switch: Removal

WARNING: This page is about a different car, the 2004 Dodge Intrepid, 2004 Chrysler Intrepid, 2004 Chrysler Concorde, and 2004 Chrysler 300M. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect and isolate the negative battery cable remote terminal from the remote battery post.
  2. Remove the appropriate seat cushion side shield (Fig 1 ). Refer to SEATS for the procedure.
    Fig 1: Heated, Memory and Power Seat Switch Locations
    G03498051Courtesy of DAIMLERCHRYSLER CORP.
  3. Working from the underside of the switch, gently rock the switch back and forth out of its mounting location.
  4. Disconnect the heated seat switch electrical connector and remove the switch.
scientia non olet · About LEMON Manuals