LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2001 >> Intrepid Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 42 (Remote Keyless Entry System) >> Self-Diagnostic System >> Retrieving & Clearing Diagnostic Trouble Codes

Retrieving & Clearing Diagnostic Trouble Codes

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2003 Dodge Intrepid, 2003 Chrysler Intrepid, 2003 Chrysler Concorde, 2003 Chrysler 300M, and 2002 Dodge Intrepid. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: DTC retrieval and clearing procedures are written specifically for Chrysler Diagnostic Readout Box (DRBIII®) scan tool. A generic scan tool may not be capable of performing all necessary functions.
  1. Turn ignition off. Connect scan tool to Data Link Connector (DLC). See Figure. Turn ignition on. Ensure there is communication with Body Control Module (BCM). If scan tool communicates with BCM, go to next step. If any communication problems exist, repair communications concern before proceeding. See Figure. See BODY CONTROL MODULES - CONCORDE, INTREPID & 300M (2002) or BODY DIAGNOSTIC PROCEDURES (2003).
  2. Using scan tool, select BODY SYSTEM, BODY COMPUTER, then READ DTCS. If any BCM DTCs exist, go to BODY CONTROL MODULES - CONCORDE, INTREPID & 300M (2002) or BODY DIAGNOSTIC PROCEDURES (2003). If no BCM DTCs exist, go to SYSTEM TESTS .
  3. To clear DTCs, use scan tool to select BODY SYSTEM, BODY COMPUTER, then CLEAR DTCS.
scientia non olet · About LEMON Manuals