LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2001 >> Intrepid Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 4 (Starting System) >> On-Vehicle Testing >> Circuit Resistance Tests >> Battery Connection Resistance Test

Battery Connection Resistance Test

WARNING: This page does not describe the selected car, but rather 15 other vehicles, including the 2001 Plymouth Neon, 2001 Dodge Ram Wagon, 2001 Dodge Ram Van, 2001 Dodge Pickup, and 2001 Dodge Neon. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disable vehicle ignition and fuel systems. See DISABLING/ENABLING IGNITION & FUEL SYSTEMS . A voltmeter accurate to one tenth of a volt will be needed for following tests.
    2. NOTE: Remove air cleaner assembly, if necessary, to access battery terminals.
  2. Connect voltmeter positive lead to negative battery cable clamp. Connect voltmeter negative lead to negative battery terminal. Crank engine and observe voltmeter. Connect voltmeter positive lead to positive battery terminal. Connect voltmeter negative lead to positive battery cable clamp. Crank engine and observe voltmeter. If voltage is detected, during either procedure, repair poor contact between appropriate cable clamp and terminal.
scientia non olet · About LEMON Manuals