LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2001 >> Intrepid Base >> Repair and Diagnosis (Single Page) >> General Information >> Computer Relearn Procedures >> General Motors (Trucks & Vans) >> Blazer, BRAVADA, Envoy, Jimmy, Pickup & SONOMA >> Electronically Erasable Programmable Read Only Memory (EEPROM) Programming (2.2L)

Electronically Erasable Programmable Read Only Memory (EEPROM) Programming (2.2L)

  1. If PCM was replaced, the EPROM in PCM must be programmed. If EEPROM is not programmed, a DTC will set. Perform EEPROM programming using Techline® equipment manufacturer's instructions and latest software applicable for vehicle model.
  2. Once EEPROM is reprogrammed, CKP sensor variation learn procedure must be performed. See CRANKSHAFT POSITION (CKP) SENSOR VARIATION LEARN PROCEDURE (2.2L & 4.3L) .
scientia non olet · About LEMON Manuals