LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2000 >> Voyager SE, 3.3 R >> Repair and Diagnosis >> Body & Frame >> Power Windows >> System Tests >> All Windows Inoperative

All Windows Inoperative

  1. Check Positive Temperature Coefficient (PTC) for power window system. See TROUBLE SHOOTING  . Replace PTC as necessary. If PTC is okay, go to next step.
  2. Remove driver's power window switch. See POWER WINDOW SWITCH  under REMOVAL & INSTALLATION. Turn ignition on. Using test light, connect ground lead to harness connector terminal No. 13 (Black Wire). Check for voltage by touching test light probe to harness connector terminals No. 9 (Tan/Dark Green Wire) and No. 11 (Tan Wire).
  3. If test light illuminates, ground circuit and circuit between battery and switch are okay. If test light does not illuminate, check power and ground circuits. Check fuse No. 104 (40-amp) in Power Distribution Center (PDC). PDC is located on left side of engine compartment. Inspect ground at instrument panel left side cowl. See WIRING DIAGRAMS  .
scientia non olet · About LEMON Manuals