LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2000 >> Voyager Base, 3.3 R >> Repair and Diagnosis >> Body & Frame >> Body, Cab Control Systems >> Body Control Modules >> System Tests >> Information Center >> All Warning Lights Inoperative

All Warning Lights Inoperative

NOTE: After making any repairs, perform BODY VERIFICATION TEST  under VERIFICATION TESTS.
  1. Turn ignition off. Disconnect information center 13-pin connector. Turn ignition on. Measure voltage between ground and terminal No. 12 (Pink wire) at information center connector. See Figure . If voltage is 10 volts or less, repair open in Pink wire. If voltage is more than 10 volts, go to next step.
  2. Measure voltage between ground and terminal No. 10 (Brown/Pink wire) at information center connector. If voltage is 10 volts or less, repair open in Pink wire. If voltage is more than 10 volts, go to next step.
  3. Remove ignition key. Turn off all lights and accessories. Close all doors. Measure resistance between ground and terminal No. 3 (Black wire) at information center connector. If resistance is 5 ohms or more, repair open in Black wire. If resistance is less than 5 ohms, replace information center.
scientia non olet · About LEMON Manuals