LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2000 >> Voyager Base, 3.3 G >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - Tests W/Codes >> Diagnostic Tests >> Test VER-1A: No Start Verification >> Final Procedure

Final Procedure

  1. Inspect vehicle to ensure all components related to the repair are properly connected. Reassemble and reconnect components as necessary. Inspect engine oil for fuel contamination. Change engine oil and filter as necessary. Attempt to start engine.
  2. If engine starts, repair is complete.If engine does not start, check for related Technical Service Bulletins (TSBs) and return to TEST NS-SEL: NO START TEST SELECTION  for additional testing.
scientia non olet · About LEMON Manuals