LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2000 >> Sebring LXi >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transmission (Service Information) >> Lubrication >> Checking Fluid Levels >> F4AC1 Transaxle

F4AC1 Transaxle

  1. Park vehicle on level surface. Apply parking brake. Start engine and run at curb idle for at least one minute. With brakes applied, move gearshift lever through all gear ranges, ending in Park.
  2. Check fluid level. If vehicle has been driven for at least 15 minutes before checking fluid level, transaxle should be considered hot and fluid level should be above WARM mark on dipstick. If vehicle has been operating for less than 15 minutes, but more than one minute before checking fluid level, transaxle should be considered to be warm and fluid level should be above ADD mark on dipstick. Add appropriate type of transmission fluid, if necessary. See RECOMMENDED FLUID  . DO NOT overfill.
scientia non olet · About LEMON Manuals