LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2000 >> Sebring LXi >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transmission (Service Information) >> Lubrication >> Checking Fluid Levels >> 41TE Transaxle

41TE Transaxle

  1. Drive vehicle until engine and transaxle are at normal operating temperature. Park vehicle on level surface. Apply parking brake. Turn engine off. Connect scan tool to data link connector. See Fig 1 .
  2. Start engine. Using scan tool, read transmission fluid temperature. With transmission fluid temperature displayed on scan tool, determine proper fluid level on dipstick. See Fig 2 . Add appropriate type of transmission fluid, if necessary. See RECOMMENDED FLUID  . DO NOT overfill. Turn engine off, and remove scan tool.
Fig 1: Locating Data Link Connector (Breeze & Cirrus)
G95F12679Courtesy of DAIMLERCHRYSLER CORPORATION.
Fig 2: Determining Transmission Fluid Level (41TE Transaxle)
G97B03805Courtesy of DAIMLERCHRYSLER CORPORATION.
scientia non olet · About LEMON Manuals