LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2000 >> Neon LE, Automatic >> Repair and Diagnosis >> Body & Frame >> Body, Cab Control Systems >> Body Control Modules >> System Tests >> Vehicle Theft Security System (VTSS) >> Parking Lights Fail To Flash During Alarm

Parking Lights Fail To Flash During Alarm

NOTE: After making any repairs, perform BODY VERIFICATION TEST  under VERIFICATION TESTS. Unless instructed otherwise in test step, reconnect any disconnected connectors.
  1. Ensure parking lights are operating properly. Repair parking lights as necessary. If parking lights are operating properly, go to next step.
  2. Turn ignition off. Disconnect Remote Keyless Entry (RKE) module connector. Connect a 12-volt test light between ground and RKE module connector terminal No. 2, headlight switch output circuit (Black/Yellow wire). See Figure. Turn parking lights on. If test light illuminates, replace RKE module. See REMOTE KEYLESS ENTRY (RKE) MODULE  under REMOVAL & INSTALLATION. If test light does not illuminate, repair open Black/Yellow wire.
scientia non olet · About LEMON Manuals