LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2000 >> Intrepid R/T >> Repair and Diagnosis >> External Pages >> Different car >> Section 101 (3.5L Engine (Service Information)) >> Oil Pan >> Removal

Oil Pan: Removal

WARNING: This page is about a different car, the 2004 Dodge Intrepid, 2004 Chrysler Intrepid, 2004 Chrysler Concorde, and 2004 Chrysler 300M. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect negative cable from remote jumper terminal.
  2. Remove dipstick and tube.
  3. Raise vehicle on hoist and drain engine oil.
  4. Remove structural collar from rear of oil pan and transmission housing (Fig 1 ).
    Fig 1: Structural Collar
    G03511989Courtesy of DAIMLERCHRYSLER CORP.
  5. Disconnect engine oil cooler line from pan.
  6. Disconnect transmission oil cooler line clips.
  7. Remove oil pan (Fig 2 ).
    Fig 2: Oil Pan
    G03511990Courtesy of DAIMLERCHRYSLER CORP.
  8. Remove oil pan gasket.
  9. Clean oil pan and all gasket surfaces.
scientia non olet · About LEMON Manuals