LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2000 >> Intrepid Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 95 (Lighting Systems - Exterior) >> Headlamp Switch >> Description - Police

Description - Police

WARNING: This page is about a different car, the 2004 Dodge Intrepid, 2004 Chrysler Intrepid, 2004 Chrysler Concorde, and 2004 Chrysler 300M. However, it is still accessible from the selected car via links, so may be relevant.

This vehicle is equipped with a stealth mode. During periods of surveillance, the headlamp switch may be placed in the "A" position or Approach mode (Fig 1). In this position, all exterior lighting (Daytime Running Lamps - if equipped) will be cancelled.

Fig 1: Headlamp Switch - Police
G03498110Courtesy of DAIMLERCHRYSLER CORP.
NOTE: On Canadian vehicles, the Daytime Running Lamps will not be disabled. These must stay operable due to Canadian federal regulations.

By pulling out on the switch (toward the driver) the lamps will be in Apprehend mode (Fig 1). In this mode, all M2 circuit interior illumination, except for PRNDL, odometer, cluster back lighting, and vehicle critical warning indicators will be cancelled. The cluster back lighting, PRNDL, and odometer will go to a minimum dimming level.

The Body Control Module (BCM) must be flashed with a special police package for the stealth mode to work. A security provision may require the unique engine controller to broadcast a code to allow the BCM to be flashed with the police package program.