Fog Lamp: Installation: IMTREPID/300M
WARNING: This page is about a different car, the 2004 Dodge Intrepid, 2004 Chrysler Intrepid, 2004 Chrysler Concorde, and 2004 Chrysler 300M. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:
Do not touch the glass of halogen bulbs with fingers or other possibly oily surface, reduced bulb life will result.
- Connect wire connector to fog lamp wire harness.
- Cover exposed terminal with teflon coated sleeve.
- Insert bulb into lamp housing.
- Hinge wire clip over bulb base.
- Engage wire clip to hold bulb in fog lamp.
- Install rear cover to fog lamp housing.
- Verify fog lamp operation and alignment.
- Install fog lamp housing screw to the front fascia.