LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2000 >> Intrepid Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 82 (Front Suspension) >> Lower Control Arm >> Disassembly >> Disassembly - Lower Control Arm (Pivot Bushing)

Disassembly - Lower Control Arm (Pivot Bushing)

WARNING: This page is about a different car, the 2004 Dodge Intrepid, 2004 Chrysler Intrepid, 2004 Chrysler Concorde, and 2004 Chrysler 300M. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove lower control arm and tension strut as an assembly from the vehicle.
  2. Separate the tension strut from the lower control arm assembly.
  3. Position lower control arm in arbor press with large end of pivot bushing inside Receiver, Special Tool MB-990799, as shown (Figure ). Position Remover, Special Tool 6644-2, on top of pivot bushing (Figure ).
  4. Using the arbor press, press the lower control arm pivot bushing out of lower control arm.
  5. Remove the pressed out lower control arm pivot bushing from the Receiver and discard.
scientia non olet · About LEMON Manuals