LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2000 >> Intrepid Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 77 (Battery System & Charging System) >> Generator >> Removal >> Removal - 2.7L

Removal - 2.7L

WARNING: This page is about a different car, the 2002 Dodge Intrepid, 2002 Chrysler Intrepid, 2002 Chrysler Concorde, and 2002 Chrysler 300M. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect negative battery cable.
  2. Raise and support vehicle.
  3. Remove lower plastic splash shield (Fig 1).
    Fig 1: Removing Generator (2.7L)
    G00990524Courtesy of DAIMLERCHRYSLER CORP.
  4. Remove transmission cooler and reposition cooler out of the way.
  5. Remove lower radiator crossmember support and position a jackstand under radiator for support.
  6. Loosen adjusting T-bolt, but do not remove.
  7. Loosen pivot bolt, but do not remove.
  8. Remove the generator drive belt. (Refer to GENERATOR/POWER STEERING BELT .)
  9. Disconnect the generator field circuit plug.
  10. Remove the B+ terminal nut and wire.
  11. Remove pivot bolt, being careful not to lose spacer.
  12. Remove generator.
scientia non olet · About LEMON Manuals