Installation - Left Side
WARNING: This page is about a different car, the 2002 Dodge Intrepid, 2002 Chrysler Intrepid, 2002 Chrysler Concorde, and 2002 Chrysler 300M. However, it is still accessible from the selected car via links, so may be relevant.
- Install converter.
- Attach a NEW V-Band clamp and tighten to 11 N.m (100 in. lbs.) (Figure).
- Install and/or tighten nut attaching pipe to transaxle bracket to 47 N.m (35 ft. lbs.) (Figure).
- Install downstream oxygen sensor and connect electrical connector (Refer to DOWNSTREAM OXYGEN SENSOR ).
- Install exhaust system (Refer to INSTALLATION - EXHAUST SYSTEM ).
- Lower vehicle.