LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2000 >> Intrepid Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 72 (2.7L V6 Engine) >> Rocker Arms >> Removal

Rocker Arms: Removal

WARNING: This page is about a different car, the 2002 Dodge Intrepid, 2002 Chrysler Intrepid, and 2002 Chrysler Concorde. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove cylinder head cover(s). (Refer to CYLINDER HEAD COVER(S) )
    CAUTION: Always rotate engine by turning the crankshaft. Failure to do so will result in valve and/or piston damage.
  2. Rotate engine until the cam lobe is on its base circle (heel), on the rocker arm being removed.
    CAUTION: Depress valve spring only enough to remove rocker arm.
  3. Using Special Tools 8215 and 8216 Adaptor, depress valve spring only enough to release tension on rocker arm (Fig 1).
    Fig 1: Removing Rocker Arm
    G00990771Courtesy of DAIMLERCHRYSLER CORP.
  4. Remove rocker arm from cylinder head.
    CAUTION: If rocker arms are to be reused, identify position of rocker arms for reassembly in their original positions.
  5. Repeat procedure for each rocker arm removed.
  6. Inspect the rocker arm for wear or damage. (Refer to INSPECTION )
scientia non olet · About LEMON Manuals