LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2000 >> Intrepid Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 72 (2.7L V6 Engine) >> Rear Mount >> Installation

Rear Mount: Installation

WARNING: This page is about a different car, the 2002 Dodge Intrepid, 2002 Chrysler Intrepid, and 2002 Chrysler Concorde. However, it is still accessible from the selected car via links, so may be relevant.
  1. Position isolator onto crossmember.
  2. Install bolts attaching isolator to crossmember and tighten to 33 N.m (250 in. lbs.) (Figure).
  3. Lower transaxle onto isolator.
  4. Install isolator nuts and tighten to 61 N.m (45 ft. lbs.) (Figure).
  5. Lower vehicle.
scientia non olet · About LEMON Manuals