LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2000 >> Intrepid Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 62 (Axle Shafts) >> Trouble Shooting >> Axle Shaft Visual Inspection

Axle Shaft Visual Inspection

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2004 Dodge Intrepid, 2004 Chrysler Intrepid, 2004 Chrysler Concorde, 2004 Chrysler 300M, and 2003 Dodge Intrepid. However, it is still accessible from the selected car via links, so may be relevant.
  1. Check for grease in the vicinity of the inboard tripod joint and outboard Constant Velocity (CV) joint. This is a sign of inner or outer joint seal boot or seal boot clamp damage.
  2. A light film of grease may appear on the inner tripod joint seal boot. This is considered normal and should not require replacement of the seal boot. All inner tripod joint seal boots are made of silicone rubber which will allow the weeping (sweating) of the joint lubricant to pass through while in operation.