LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2000 >> Intrepid Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 138 (HVAC - Airflow Distribution) >> Blower Motor >> Installation

Blower Motor: Installation

WARNING: This page is about a different car, the 2003 Dodge Intrepid, 2003 Chrysler Intrepid, 2003 Chrysler Concorde, and 2003 Chrysler 300M. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the blower motor in the HVAC housing and tighten the mounting screws to 2.2 N.m (20 in. lbs.).
  2. Install the blower motor housing cover.
  3. Position the blower motor wiring grommet in the blower motor housing cover.
  4. Connect the blower motor harness connector to the blower motor resistor block/power module.
  5. Install the lower right under panel duct.
  6. Connect the negative battery cable remote terminal to the remote battery post.
scientia non olet · About LEMON Manuals