LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2000 >> Intrepid Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 137 (Air Conditioning Controls) >> Blend Door Actuator >> Installation

Blend Door Actuator: Installation

WARNING: This page is about a different car, the 2003 Dodge Intrepid, 2003 Chrysler Intrepid, 2003 Chrysler Concorde, and 2003 Chrysler 300M. However, it is still accessible from the selected car via links, so may be relevant.
  1. Connect the wire harness connector to the blend door actuator.
  2. Install the blend door actuator on the HVAC housing, making sure its keyed shaft is positioned properly.
  3. Install the three fastener screws and tighten to 2.2 N.m (20 in. lbs.).
  4. Install the left and right underpanel silencer/ducts.
  5. Connect the negative battery cable remote terminal to the remote battery post.
scientia non olet · About LEMON Manuals