LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2000 >> Intrepid Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 134 (Door System - Front) >> Hinge >> Installation >> Installation - Hinge

Installation - Hinge

WARNING: This page is about a different car, the 2003 Dodge Intrepid, 2003 Chrysler Intrepid, 2003 Chrysler Concorde, and 2003 Chrysler 300M. However, it is still accessible from the selected car via links, so may be relevant.
  1. Place hinge in position on vehicle.
  2. Install bolt and nut attaching hinge to hinge pillar. Tighten the hinge bolt to 28 N.m (250 in lbs.) torque.
  3. Install bolt and nut attaching hinge to front door. Tighten the hinge bolt and nut to 28 N.m (250 in lbs.) torque. If the double ended stub is removed or replaced tighten the stud to 14 N.m (120 in. lbs.) torque.
  4. Verify door alignment and operation, adjust as necessary.
scientia non olet · About LEMON Manuals