Door Glass: Installation
WARNING: This page is about a different car, the 2003 Dodge Intrepid, 2003 Chrysler Intrepid, 2003 Chrysler Concorde, and 2003 Chrysler 300M. However, it is still accessible from the selected car via links, so may be relevant.
- Lower glass into opening at top of door.
- Place glass in position against roller channel.
- Insert lift plate nuts into key hole slots in roller channel and slide channel forward to locked position.
- Tighten nuts to attach regulator roller channel to glass and lift plates.
- Install pull cup support bracket, water shield, door trim panel, and flag cover. (Refer to INSTALLATION ).