LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2000 >> Intrepid Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 118 (Seat System) >> Rear Seat Back Cover >> Installation

Rear Seat Back Cover: Installation

WARNING: This page is about a different car, the 2004 Dodge Intrepid, 2004 Chrysler Intrepid, 2004 Chrysler Concorde, and 2004 Chrysler 300M. However, it is still accessible from the selected car via links, so may be relevant.
  1. Position seat back cover on seat back.
  2. Install hog ring on right side listing pocket of cover to foam, starting in the middle and lining up the die cuts in the listing pocket with the hog ring windows in the foam (three places).
  3. Repeat for the left side listing pocket of cover.
  4. Place cover seams in salvage trenches of foam.
  5. Roll corners and edges of cover over foam.
  6. Flip seat over making sure cover is pulled up over frame on all corners. Push top, bottom, inside, outside, corners of the foam into the cover and engage J-strap retainers.
  7. Install rear seat back (Refer to REAR SEAT BACK  ).
scientia non olet · About LEMON Manuals