Instrument Panel Top Cover: Removal
WARNING: This page is about a different car, the 2004 Dodge Intrepid, 2004 Chrysler Intrepid, 2004 Chrysler Concorde, and 2004 Chrysler 300M. However, it is still accessible from the selected car via links, so may be relevant.
- Using a trim stick (special tool #C-4755) or equivalent, pry out the left and right A-pillar moldings, slide rearward and remove (Fig 1 ).
- Using a trim stick or equivalent, slip each end of the instrument panel top cover up to disengaging clips.
- Lift rear edge of the top cover using a trim stick along the rear edge of the instrument panel top cover.
- Slide the instrument panel top cover rearward to disengaging the eight clips.
- Remove the instrument panel top cover from vehicle.