Instrument Panel Center Bezel: Removal
WARNING: This page is about a different car, the 2004 Dodge Intrepid, 2004 Chrysler Intrepid, 2004 Chrysler Concorde, and 2004 Chrysler 300M. However, it is still accessible from the selected car via links, so may be relevant.
- Open hood and disconnect the negative battery-cable remote terminal from the remote battery post (Figure ).
- Remove ash receiver (if applicable).
- Using a trim stick (special tool #C-4755) or equivalent, gently pry out on center trim bezel. Disconnect wiring connectors to HVAC controls, cigar lighter/auxiliary power outlet and traction control switch (if equipped) (Fig 1 ).
- Remove instrument panel center trim bezel.NOTE: The traction control switch, HVAC control head and cigar lighter/auxiliary power outlet must be transferred to new bezel if being replaced.