LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2000 >> Intrepid Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 116 (Instrument Panel) >> Glove Box >> Removal

Glove Box: Removal

WARNING: This page is about a different car, the 2004 Dodge Intrepid, 2004 Chrysler Intrepid, 2004 Chrysler Concorde, and 2004 Chrysler 300M. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the four screws at bottom of glove box door.
  2. Open the glove box door and slide sidewalls inboard to remove the door/box assembly from instrument panel.
  3. Place the glove box on a cloth to protect the door surface.
  4. Remove the nine screws from backside of the door.
  5. Separate the inner and outer door.
  6. Remove one screw to the latch.
  7. Remove latch from outer door.
NOTE: If the glove box door is going to be left off for an extended period of time, the Ignition Off Draw (IOD) fuse should be pulled to maintain battery condition.
scientia non olet · About LEMON Manuals