LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2000 >> Intrepid Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 105 (Fuel Injection System) >> Throttle Body >> Removal >> Removal - 3.5L

Removal - 3.5L

WARNING: This page is about a different car, the 2004 Dodge Intrepid, 2004 Chrysler Intrepid, 2004 Chrysler Concorde, and 2004 Chrysler 300M. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect negative cable from battery
  2. Remove wiper arms.
  3. Remove cowl screen.
  4. Remove cowl plenum.
  5. Disconnect air plenum from throttle body.
  6. Remove throttle cable bracket.
  7. Disconnect electrical connectors.
  8. Disconnect top vacuum hose.
  9. Remove the throttle body support bracket from the bottom of the throttle body.
  10. Remove 3 throttle body bolts.
  11. Hold throttle lever in wide open position. Remove throttle cable and speed control cables from throttle arm.
  12. Clean mating surfaces.
scientia non olet · About LEMON Manuals