LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2000 >> Intrepid Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 105 (Fuel Injection System) >> Throttle Body >> Removal >> Removal - 2.7L

Removal - 2.7L

WARNING: This page is about a different car, the 2004 Dodge Intrepid, 2004 Chrysler Intrepid, 2004 Chrysler Concorde, and 2004 Chrysler 300M. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect negative cable from battery
  2. Disconnect air plenum from throttle body.
  3. Hold throttle lever in wide open position. Remove throttle cable and speed control cables from throttle arm.
  4. Remove throttle cable bracket.
  5. Disconnect electrical connectors from throttle body.
  6. Remove the throttle body support bracket from the bottom of the throttle body.
  7. Remove 3 throttle body bolts.
  8. Remove throttle body.
  9. Clean mating surfaces.
scientia non olet · About LEMON Manuals