LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2000 >> Intrepid Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 105 (Fuel Injection System) >> Fuel Injector >> Removal >> Removal - 3.5L

Removal - 3.5L

WARNING: This page is about a different car, the 2004 Dodge Intrepid, 2004 Chrysler Intrepid, 2004 Chrysler Concorde, and 2004 Chrysler 300M. However, it is still accessible from the selected car via links, so may be relevant.
  1. Release fuel system pressure. Refer to STANDARD PROCEDURE - FUEL SYSTEM PRESSURE RELEASE PROCEDURE . .
  2. Disconnect the negative battery cable.
  3. Remove intake manifold plenum. Refer to the ENGINE 3.5L for information.
  4. Remove intake manifold plenum mounting bolts. Lift Plenum up off of engine. Cover intake manifold to prevent foreign material from entering engine.
  5. Disconnect fuel supply tube quick connect fitting at the rear of the fuel rail. Refer to QUICK CONNECT FITTING .
  6. If the injector connectors are not tagged with their cylinder number, tag them to identify the correct cylinder.
  7. Remove electrical connectors from the fuel injectors.
  8. Remove mounting bolts on both sides of fuel rail.
  9. Lift fuel rail straight up off of cylinder head.
  10. Remove retaining clips from fuel injectors at fuel rail.
  11. Remove fuel injectors.
scientia non olet · About LEMON Manuals