LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2000 >> Intrepid Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 103 (Frame System & Bumper System) >> Front Fascia >> Installation >> Installation - Intrepid

Installation - Intrepid

WARNING: This page is about a different car, the 2004 Dodge Intrepid, 2004 Chrysler Intrepid, 2004 Chrysler Concorde, and 2004 Chrysler 300M. However, it is still accessible from the selected car via links, so may be relevant.
  1. Connect fog lamp wire connectors, if equipped.
  2. Place fascia pin position on vehicle, by fitting foam to bumper beam.
  3. Snap sides of fascia over drive pin fasteners on fenders.
  4. Install fasteners to upper radiator closure.
  5. Install fasteners attaching fascia to splash shields.
  6. Install fasteners attaching bottom of fascia to lower crossmember.
scientia non olet · About LEMON Manuals