Seat Back Element
WARNING: This page is about a different car, the 2000 Chrysler LHS and 2000 Chrysler 300M. However, it is still accessible from the selected car via links, so may be relevant.
Unplug suspect heated seat back 2-pin connector. Using DVOM, measure resistance between heated seat back terminals "A" and "B". See Figure . If continuity is not indicated, replace heated seat back element. If continuity is indicated, measure resistance between heated seat cushion terminal "B" and ground. If continuity is not indicated, test heated seat sensor. See HEATED SEAT SENSOR . If continuity is indicated, replace heated seat back element.